Ladder Angle Calculator (4-to-1 Rule)
Set a ladder safely with the 4-to-1 rule: how far out to put the base, what size extension ladder to buy, and which duty rating covers your weight.
Results
- Set the base out from the wall
- 3.75
- Ladder angle
- 75.5° (1 out for every 4 up)
- Ladder length touching the wall
- 15.4616
- Length needed
- 18.4616
- Extension ladder to buy
- 24 ft (works to about 21 ft after the 3 ft section overlap)
- Duty rating
- Type II (225 lb) or higher
⚠️ Keep 3 points of contact (two hands and a foot, or two feet and a hand), face the ladder, and keep your belt buckle between the rails.
⚠️ Don’t stand above the 4th rung from the top of an extension ladder, or on the top two steps of a stepladder.
⚠️ Stay at least 10 ft from overhead power lines, and use fiberglass — not aluminum — near any electricity.
💡 Elbow check: stand with your toes at the ladder’s feet and hold your arms straight out — your palms should just touch a rung.
💡 The 4-to-1 rule and the 3 ft extension above a landing come from OSHA’s ladder standard (29 CFR 1926.1053) and ANSI A14. Set the feet on firm, level ground and tie off or have someone foot the ladder on tall climbs.
Formula
4-to-1 rule: base distance = height to the top support ÷ 4 (≈ 75.5°); ladder length = √(height² + base²) + 3 ft above a roof edge; extension ladder working length = size − overlap