Plywood & OSB Sheet Calculator

How many sheets of plywood or OSB do you need? Calculate 4×8 sheets for walls, subfloors and roof decks (with roof pitch), plus nails and cost.

For a roof, use the building footprint width including overhangs.
%

Results

Area to cover
320
Sheets
11
Nails (6″ edges, 12″ field)
≈ 770

🛒 Shopping list

ItemQtyPrice each ($)Cost
7/16″ OSB, 4×8 11 sheets$198.00
8d nails (5 lb box) 2 boxes$40.00
Estimated materials total$238.00

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

💡 Leave a ⅛″ gap between panels (the width of a 10d nail) so they can expand without buckling.

How to do it

Difficulty: ModerateTime: Half a day to 2 days

Tools you’ll need

  • Circular saw
  • Chalk line
  • Nail gun or hammer
  • Tape measure
  • ⅛″ spacer (a 10d nail)

Steps

  1. Start at a corner with the long side of the sheet running across the framing (perpendicular to studs, joists or rafters).
  2. Stagger the end joints by half a sheet from row to row, and make sure every edge lands on framing.
  3. Leave a ⅛″ gap at all panel edges.
  4. Nail every 6″ along the edges and every 12″ in the field (or follow the plans / local code).
  5. Cut openings for doors and windows after the sheet is fastened, with a circular saw or router.

Common mistakes

  • Panels running the wrong way — they’re much weaker along the short direction.
  • No expansion gap — panels buckle when they get wet.
👷 When to call a pro: Roof decks are work at height — use fall protection, or hire a roofer for anything steep or two storeys up.

Formula

Area = length × width (× √(1 + (pitch/12)²) for roofs) − openings; sheets = area × (1 + waste) ÷ sheet area

More DIY Projects calculators

← Browse DIY projects