Epoxy Garage Floor Calculator

Epoxy kits or gallons for a 1-, 2- or 3-car garage floor, plus flakes, clear topcoat and the prep supplies that make a coating last.

Results

Floor area
484 ft²
Epoxy kits
3 kits (one coat)
Clear topcoat
3.18 gal

🛒 Shopping list

ItemQtyPrice each ($)Cost
Water-based garage floor epoxy kit (≈ 250 ft²) Includes etch/cleaner and flakes in most kits3 kits$390.00
Clear polyaspartic / urethane topcoat, 1 gal Full flake broadcast soaks up more topcoat4 gal$340.00
Concrete degreaser, 1 gal 1 gal$18.00
Epoxy crack & joint filler 2 tubes$40.00
9″ ⅜″-nap roller covers (solvent-resistant) + frame 3 covers$18.00
Spiked shoes Lets you walk on wet coating to broadcast flakes1 pairs$20.00
Organic-vapor respirator & nitrile gloves 1 kits$35.00
Estimated materials total$861.00

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

⚠️ Do a moisture test first: tape a 2 × 2 ft plastic sheet to the slab for 24 hours. Condensation or a dark spot underneath means moisture will lift the coating (ASTM D4263).
⚠️ Most epoxies need the slab and air between about 50 °F and 90 °F, with the floor at least 5 °F above the dew point. Ventilate — solvent-based products are flammable.
💡 Most coating failures are prep failures: degrease, grind or etch to a sandpaper-like profile, vacuum, and fill cracks before coating.
💡 Hot-tire pickup is the main problem with thin water-based kits; 100% solids epoxy with a polyaspartic topcoat lasts much longer.
💡 Coverage formula: 1 gallon spread 1 mil thick covers 1,604 ft²; a 100% solids product keeps all of that thickness when it cures.

Formula

Coverage (ft²/gal) = 1,604 × % solids ÷ wet mils; gallons = area × coats ÷ coverage; kits = area ÷ kit coverage

More DIY Projects calculators

← Browse DIY projects