Fence Calculator

Plan a wood fence: number of posts, rails and pickets, bags of concrete for the post holes, and a material cost estimate — for privacy or spaced-picket fences.

0 for a privacy fence; 2–3″ for a spaced picket fence.
About ⅓ of the post above ground, and below your frost line.
About 3× the post width.
%

Results

Posts
15 × 10 ft (4×4)
Rails
39 × 8 ft (2×4)
Pickets
230
Concrete (50 lb fast-setting bags)
47
Fence sections
13

🛒 Shopping list

ItemQtyPrice each ($)Cost
4×4 PT posts, 10 ft 15 posts$240.00
2×4 PT rails, 8 ft 39 boards$265.20
1×6 pickets, 6 ft 230 pickets$736.00
Fast-setting concrete, 50 lb 47 bags$352.50
Exterior screws or ring-shank nails (5 lb box) 2 boxes$60.00
Gate hardware kit (hinges + latch) 1 kits$35.00
Estimated materials total$1,688.70

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

💡 Gates are counted as an extra post each; wide or double gates need sturdier posts set deeper.
💡 Call 811 (or your local utility-locate service) a few days before digging — it’s free and required in most places.

How to do it

Difficulty: ModerateTime: 1–2 weekends

Tools you’ll need

  • Post-hole digger or power auger
  • String line & stakes
  • 4 ft level / post level
  • Circular saw
  • Drill / driver
  • Wheelbarrow

Steps

  1. Confirm your property line (survey or plat) and any HOA/town height rules. Call 811 (or your local utility-locate service) a few days before digging — it’s free and required in most places.
  2. Stake the corners and run a string line; mark post positions at your spacing.
  3. Dig holes about 3× the post width and ⅓ of the post height deep (below the frost line).
  4. Add 4–6″ of gravel, set each post plumb with braces, and fill with concrete sloped away from the post.
  5. After the concrete sets (fast-setting: about 4 hours), attach the rails level between posts.
  6. Screw on the pickets with a spacer block for even gaps, then hang the gates.

Common mistakes

  • Setting posts without a string line — the fence wanders.
  • Concrete mounded level with the ground, so water pools at the post.
  • Forgetting gate width when spacing the posts.
👷 When to call a pro: Get a survey if the boundary is unclear — a fence on the neighbour’s land can be ordered removed.

Formula

Sections = length ÷ post spacing; posts = sections + 1 + gates; rails = sections × rails per section; pickets = length ÷ (picket width + gap)

More DIY Projects calculators

← Browse DIY projects