Baseboard & Trim Calculator

Calculate baseboard or trim for a room: linear feet minus doorways, number of 8, 12 or 16 ft pieces with waste, nails, caulk and cost.

%

Results

Baseboard needed
49
Pieces
4 × 16 ft
Finish nails
≈ 74 (2 per stud)
Inside corners (rectangular room)
4 — cope these

🛒 Shopping list

ItemQtyPrice each ($)Cost
Primed MDF baseboard, 16 ft 4 pieces$70.40
2″ 18-gauge brad nails (box) 1 box$10.00
Painter’s caulk (10 oz) 2 tubes$8.00
Wood filler 1 tub$7.00
Estimated materials total$95.40

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

💡 Order whole lengths so long walls need no joints; where you must join, use a 45° scarf joint over a stud.

How to do it

Difficulty: EasyTime: 1 day per room

Tools you’ll need

  • Miter saw
  • Coping saw
  • Brad nailer (18 ga)
  • Stud finder
  • Tape measure & pencil
  • Caulk gun

Steps

  1. Mark the studs on the wall just above the baseboard height.
  2. Start on the wall opposite the door: cut square ends into the inside corners.
  3. Cope the inside corners (cut a 45°, then back-cut along the profile with a coping saw) so they stay tight as the house moves.
  4. Miter outside corners at 45° and glue them.
  5. Nail twice into each stud — one low into the plate, one higher into the stud.
  6. Fill the nail holes, caulk the top edge and paint.

Common mistakes

  • Mitering inside corners — they open up over time; cope them instead.
  • Measuring from the middle of the wall instead of along the floor, where most walls are out of square.

Formula

Linear feet = 2 × (length + width) − doorways; pieces = linear feet × (1 + waste) ÷ piece length

More DIY Projects calculators

← Browse DIY projects