Post Hole Concrete Calculator

How many bags of concrete per fence or deck post? Enter post size, hole diameter and depth to get 50, 60 or 80 lb bags per hole and in total.

Results

Bags per hole
2.46
Total bags (incl. 5% extra)
26
Concrete volume
9.20692
Gravel (0.5 ft³ bags)
6

🛒 Shopping list

ItemQtyPrice each ($)Cost
Concrete mix (50 lb fast-setting) 26 bags$195.00
All-purpose gravel (0.5 ft³ bag) 6 bags$36.00
Estimated materials total$231.00

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

💡 Hole depth: about ⅓ of the post’s height above ground, and always below your local frost line.
💡 Call 811 (or your local utility-locate service) a few days before digging — it’s free and required in most places.

How to do it

Difficulty: EasyTime: 1–3 hours for 10 posts (plus digging)

Tools you’ll need

  • Post-hole digger or auger
  • Level
  • Bucket & stick (or wheelbarrow)
  • 2×4 braces & stakes

Steps

  1. Call 811 (or your local utility-locate service) a few days before digging — it’s free and required in most places.
  2. Dig each hole about 3× the post width and deep enough to get below the frost line.
  3. Add 6″ of gravel for drainage and tamp it.
  4. Set the post, plumb it on two sides with a level and brace it.
  5. Pour dry fast-setting mix to about 3–4″ below grade, then add water per the bag (about a gallon per 50 lb).
  6. Slope the top away from the post and let it set before attaching rails or loads.

Common mistakes

  • Concrete in a shallow “bell” at the top only — posts heave in frost.
  • Not bracing posts while the concrete sets.

Formula

Concrete per hole = π/4 × hole diameter² × depth − post volume; bags = total ÷ bag yield

More DIY Projects calculators

← Browse DIY projects