Concrete Block (CMU) Calculator

Calculate cinder blocks / CMU for a wall: number of 8×8×16 blocks, bags of mortar and grout to fill the cores, with a shopping list and cost estimate.

%

Results

Wall area
80
Blocks
95
Mortar (80 lb bags)
4

🛒 Shopping list

ItemQtyPrice each ($)Cost
8″ concrete blocks 95 blocks$213.75
Type S mortar mix, 80 lb 4 bags$40.00
Estimated materials total$253.75

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

💡 Core volumes are approximate (they vary by block maker). Walls need a concrete footing below the frost line — use the concrete calculator for that.

How to do it

Difficulty: AdvancedTime: 2–4 days (plus footing cure time)

Tools you’ll need

  • Mason’s trowel & jointer
  • Mortar mixer or wheelbarrow + hoe
  • 4 ft level & line blocks
  • Masonry saw or angle grinder
  • Rubber mallet

Steps

  1. Pour a concrete footing (twice the wall width, below the frost line) and let it cure.
  2. Dry-lay the first course to check spacing, then set the corner blocks in a full mortar bed, level and square.
  3. Stretch a mason’s line between the corners and lay the first course to it.
  4. Build up the corners a few courses at a time (“leads”), then fill in between with ⅜″ joints, staggering by half a block.
  5. Tool the joints when the mortar is thumbprint-hard; place rebar and grout cores as specified.

Common mistakes

  • No proper footing — the wall cracks and leans.
  • Mixing more mortar than you can use in about 90 minutes.
👷 When to call a pro: Retaining walls and structural block walls should be designed by an engineer.

Formula

Blocks = wall area (ft²) × 1.125 per ft² (16×8 face) × (1 + waste); mortar ≈ 1 bag (80 lb) per 28 blocks

More DIY Projects calculators

← Browse DIY projects