Gutter & Downspout Calculator

Gutter size (5″ or 6″) and number of downspouts from roof area, pitch and rainfall, plus a full parts list: sections, hangers, end caps, elbows.

Footprint of the roof, measured flat from above.
in/h
Heaviest 5-minute rainfall rate for your area (NOAA Atlas 14); 4–8 in/h in much of the U.S.

Results

Gutter size
5″ K-style
Downspouts
4 × 2″ × 3″
Adjusted roof area
2,200 ft² (≈ 1,100 ft² per run)
Gutter slope
¼″ per 10 ft toward each downspout (≈ 1.25″ total fall on an average run)

🛒 Shopping list

ItemQtyPrice each ($)Cost
5″ K-style aluminum gutter, 10 ft 11 sections$121.00
Hidden hangers with screws One every 24″ (18″ where snow and ice are heavy)52 hangers$78.00
End caps (left/right pairs) 2 pairs$12.00
Corners (inside/outside, match each) 2 corners$28.00
Outlets / drop for downspouts 4 pieces$24.00
2″ × 3″ downspout, 10 ft 8 lengths$96.00
Downspout elbows (3 per downspout) 12 elbows$48.00
Splash blocks or extensions Discharge 4–6 ft away from the foundation4 pieces$40.00
Gutter sealant, 10 oz 2 tubes$16.00
Pop rivets / gutter screws (pack) 1 packs$8.00
Estimated materials total$471.00

Prices are rough US starting points, not quotes — type in your local store’s prices. Taxes and delivery not included.

💡 Pitch factors and gutter capacities follow the common SMACNA-based sizing method used by gutter manufacturers. Long runs (over ≈ 40 ft) are often pitched from the middle down to a downspout at each end.
💡 Seamless gutters are formed on site by installers; sectional gutters are the DIY option.

Formula

Adjusted area = roof plan area × pitch factor; gutter size: adjusted area × rainfall (in/h) ≤ 5,520 (5″ K) or 7,960 (6″ K); downspouts: 1 in² of opening per 100 ft² of roof and one every 30–40 ft

More DIY Projects calculators

← Browse DIY projects