Earthquake Magnitude Explained: Why a 7 Is 32 Times a 6
News reports say “a magnitude 7” as if it were only a little worse than a 6. It isn’t. Earthquake magnitude is a logarithmic scale, and the gap between numbers is enormous. Here is what magnitude actually measures, how to compare quakes, and what decides how much damage they do.
Each step is 10× the shaking and about 32× the energy
According to the U.S. Geological Survey, each whole-number increase in magnitude means a tenfold increase in the amplitude measured on a seismogram and about 32 times more energy released. So:
- A magnitude 7 releases about 32× the energy of a 6.
- A magnitude 8 releases about 1,000× (32 × 32) the energy of a 6.
- Even 0.2 on the scale matters: it is roughly twice the energy.
Energy in tons of TNT
Seismologists estimate radiated energy with log₁₀E = 1.5M + 4.8 (E in joules). Converted to TNT:
| Magnitude | Energy (TNT equivalent) | How often worldwide (USGS, 2000–2021) |
|---|---|---|
| 5 | ≈ 480 tons | very common |
| 6 | ≈ 15 kilotons — about one Hiroshima bomb | ≈ 137 a year (M6–6.9) |
| 7 | ≈ 480 kilotons | ≈ 14 a year (M7–7.9) |
| 8 | ≈ 15 megatons | ≈ 1 a year (M8+) |
| 9 | ≈ 480 megatons | a few per century |
Yearly figures are averages of USGS worldwide counts for 2000–2021. Compare any two magnitudes with the earthquake energy calculator.
Magnitude is not damage: meet intensity
Magnitude describes the earthquake at its source — one number for the whole event. Intensity describes the shaking at a particular place, and it is intensity that knocks buildings down. The same quake can be devastating in one town and barely felt in another. Intensity depends on:
- Distance — shaking weakens with distance from the fault.
- Depth — a shallow quake shakes the surface much harder than a deep one of the same magnitude.
- Ground — soft soils and landfill amplify shaking, and waterlogged sand can liquefy and lose its strength.
- Buildings — above all. Modern codes for reinforced concrete and steel, and bolting wood houses to their foundations, save lives; unreinforced masonry and heavy roofs are the most dangerous.
How far away was it? The P–S wave trick
An earthquake sends out a fast P wave (a sharp jolt) and a slower S wave (the stronger rolling shaking). The further away the quake, the longer the gap between them. With typical crustal speeds of about 6 km/s and 3.5 km/s, the distance is roughly 8 km for every second of gap — a 20-second gap means the quake was about 170 km away. The same gap is what earthquake early-warning systems use to send alerts seconds before strong shaking arrives.
What to do when the ground shakes
- Drop, Cover and Hold On (Ready.gov): drop onto your hands and knees, cover your head and neck (under a sturdy table if you can), and hold on until the shaking stops.
- Stay indoors until the shaking stops; don’t run outside, where falling glass and masonry are a major danger.
- Expect aftershocks, and be ready to Drop, Cover and Hold On again.
- If you are at the coast and the shaking is strong or long, move to high ground or inland as soon as it stops — a tsunami may follow within minutes. See tsunamis explained.
Energy figures use a standard empirical formula and are approximate. This guide is educational; follow official guidance from your local emergency management agency.
Frequently asked questions
How much stronger is a magnitude 7 earthquake than a 6?
About 32 times more energy and 10 times larger shaking amplitude on a seismogram, according to the USGS. A magnitude 8 releases about 1,000 times the energy of a 6.
How much energy does a magnitude 7 earthquake release?
About 2 × 10^15 joules, roughly equivalent to 480,000 tons (480 kilotons) of TNT, using the standard relation log10 E = 1.5M + 4.8.
What is the difference between magnitude and intensity?
Magnitude measures the size of the earthquake at its source and is one number per quake. Intensity measures how strongly the ground shakes at a particular place, which depends on distance, depth, soil and buildings, and is what determines damage.
How can you tell how far away an earthquake was?
Time the gap between the first sharp jolt (P wave) and the stronger shaking (S wave). Each second of gap is roughly 8 km of distance, so a 20-second gap suggests the quake was about 170 km away.
How many large earthquakes happen each year?
From 2000 to 2021, USGS counts average about 137 magnitude 6–6.9 earthquakes, about 14 of magnitude 7–7.9, and roughly one of magnitude 8 or more per year worldwide.
What should you do during an earthquake?
Drop, Cover and Hold On: drop to your hands and knees, cover your head and neck, and hold on until the shaking stops. If you are near the coast and shaking is strong or long, move to high ground afterwards because a tsunami may follow.