Ice Thermal Storage Calculator
How much ice would it take to cool a building or data center for a few hours? Tonnes and volume of ice from the heat load, plus the extra electricity ice-making uses compared with chilled water.
MW
h
Making ice needs a colder evaporator, so COP is typically lower than for chilled water.
Results
- Ice needed
- 4,311tonnes
- Ice volume
- 4,702m³
- That is
- 1.88 Olympic pools of solid ice
- Electricity to make the ice
- 114,300kWh
- Electricity with ordinary chilled water
- 66,670kWh
- Extra electricity for ice
- 71.4%
- Heat to reject while freezing (load + compressor)
- 514,300kWh
💡 Ice storage moves cooling in time — freeze at night, melt by day. It does not remove the need to reject heat outdoors.
💡 It saves water only if that heat is rejected with dry coolers (no evaporation), which works best on cool nights. Rejected through cooling towers, ice-making evaporates more water than chilling directly.
Formula
Ice needed = heat (kJ) ÷ 334 kJ/kg (latent heat of melting); electricity = heat ÷ COPRules of thumb
- Each kWh of heat melts about 10.8 kg of ice (334 kJ/kg). Real systems also lose some cold through tank walls and pumping.