Attic Insulation Savings Calculator

How much will adding attic insulation save? Heat loss through the ceiling before and after, yearly heating and cooling savings, payback, and the ENERGY STAR recommended R-value for your climate zone.

ft²
No insulation ≈ R-2 (drywall and air films). 3–4 inches of fiberglass ≈ R-11.
$/therm
%
$/kWh
Roughly SEER ÷ 3.4. A typical heat pump or AC is about 3.
$/ft²
Get local quotes — blown-in insulation is often quoted per square foot.

Results

Yearly savings
$311.66
Heating savings
$267.27
Cooling savings
$44.39
Heat flow through the ceiling cut by
81.7%
Installed cost
$2,625.00
Simple payback
8.42 years
ENERGY STAR recommendation for this climate
R60 if uninsulated, R49 if you have 3–4 in.
Upgrade fromTo R-60: yearly savingsPayback
No insulation (≈ R-2)$2,028.981.29 years
R-11$311.668.42 years
R-19$150.9817.4 years
R-30$69.9637.5 years
R-38$40.5164.8 years
💡 Heat flow falls as 1/R, so the first inches of insulation save far more than the last. Going from none to R-11 matters more than R-30 to R-60.
💡 Cooling savings are conservative: a summer attic gets much hotter than the outdoor air. Air-seal the attic floor before insulating — leaks bypass insulation.
💡 Degree-day values are approximate long-term averages; use your local figures for accuracy.

Formula

Heat flow through the ceiling = area × 24 × degree days ÷ R; savings = area × 24 × degree days × (1/R_old − 1/R_new), converted to fuel by system efficiency

Rules of thumb

  • ENERGY STAR estimates that sealing air leaks and adding insulation saves homeowners an average of 15% on heating and cooling costs (11% of total energy costs).

More Everyday calculators